1.5mm Crimp Terminal Manufacturer
1.5mm Crimp Terminals from RXSY
Looking for 1.5mm pitch crimp terminals? RXSY offers a complete range of 1.5mm crimp terminals designed for reliable board-to-wire connections. Our 1.5mm connectors are JST-compatible, ROHS certified, and available in OEM/ODM customization. Key models include RXSY-ZH1.5-T, RXSY-ZE1.5-T.
| Model | Pitch | Mounting |
|---|---|---|
| RXSY-ZE1.5-T | 1.5mm | – |
| RXSY-ZH1.5-T | 1.5mm | – |
All RXSY connectors support fast sampling (7 days), small-batch customization and pin-to-pin replacement. Contact us for a quote today.
1.5mm Crimp Terminal Specifications
| Parameter | Typical Value |
|---|---|
| Pitch | 1.5 mm |
| Rated Current | 1.5A |
| Rated Voltage | 250V AC/DC |
| Contact Resistance | ≤ 20 mΩ |
| Insulation Resistance | ≥ 1000 MΩ |
| Withstanding Voltage | 500V AC/min |
| Operating Temperature | -40°C to +85°C |
| Applicable Wire | AWG #28–#24 |
| Contact Material | Phosphor bronze / Brass, tin or gold plated |
| Housing Material | PA66 (Nylon), UL94V-0 |
| Mating Cycles | ≥ 30 cycles |
| Compliance | RoHS / REACH |
How to Choose the Right 1.5mm Crimp Terminal
- Confirm the pitch – 1.5mm must match your PCB hole spacing and mating header.
- Select pin count – count the signals you need; leave spare pins if future expansion is likely.
- Choose mounting type – SMT (reflow, high density) vs DIP/THT (through-hole, stronger hold).
- Orient the header – straight (vertical) or right-angle, depending on enclosure height.
- Check current rating – 1.5A per contact typical; derate ~20% for continuous loads.
- Locking & polarization – choose a latching type if vibration or blind mating is expected.
- Plating – tin for general use, gold for low-signal or high-mating-cycle applications.
Typical Applications
1.5mm crimp terminals are widely used in industrial control boards, consumer electronics, smart home
devices, LED lighting drivers, battery packs, sensor modules and medical instruments.
Frequently Asked Questions
What is the current rating of a 1.5mm crimp terminal?
Typically 1.5A per contact at ambient temperature. For continuous loads above 50°C, derate by about 20%.
Is this connector JST compatible?
Yes. RXSY 1.5mm series are designed as pin-to-pin replacements for the corresponding JST series (PH, XH, SH, GH, ZH, VH, CH), so they drop into the same PCB footprint.
What wire gauge does it support?
AWG #28–#24 depending on the contact design. Contact us with your wire specification for confirmation.
Do you provide samples and small-batch orders?
Yes. Samples ship within 7 days and small-batch production is supported with flexible MOQ.
Can you customize pitch, plating or housing color?
Yes. OEM/ODM customization is available including pitch, pin count, plating, housing color and packaging.
Get a Quote
Send us your specification (pitch, pin count, mounting type, quantity) and we will respond within 24 hours.
Contact RXSY.
